Make Your Own Mallet – Week 1 Session Notes
This is the full recording of Week 1 of our Course – we cover Dinesh’s Background, the most important variables that are “controllable” when considering mallet creation and usage, and then how to build some! Scroll down for timestamps and notes on each part of the session.
SECTION 1 · The Maker
Dinesh’s Background & Intro
00:09:13
Welcome, and official start. Reminder to join the FB group! Dinesh founded Dragonfly Percussion around 1999–2000 and has played in the Buffalo Philharmonic since 2003. He started making mallets as a student, beginning with a cabinet knob glued onto a stick for a glockenspiel part, and years of orchestra work taught him that the right tool makes the technique easier.
SECTION 2 · The Science
The Timbre Discussion
00:25:11
Timbre is what makes a trumpet and an oboe sound different when both are played on the same note. For percussion, Dinesh breaks it into three parts: attack, EQ (the balance of highs and lows) and projection.

SECTION 3 · The Science
Mallet Variables
00:28:56
A mallet impacts timbre through mass, durometer (hardness) and leverage/flex (the handle), which together affect both the sound and the feel. The rule: “mass giveth, softness taketh away.” Only weight adds fundamental, and soft coverings only remove highs.

SECTION 4 · Build 1
Build 1: The Masking-Tape Core Mallet
00:38:05
A light masking-tape core on a 5/16 inch birch dowel, padded with foam weatherstripping, covered in polar fleece and tied off with embroidery floss. The result is a light, soft, “ethereal” mallet.
SECTION 5 · Build 2
Build 2: The Cabinet-Knob Mallet On A Bamboo Skewer
01:04:10
A heavy steel cabinet knob on a short bamboo skewer, glued with epoxy, padded with craft felt, then covered and tied like Build 1. The result is a bouncy “little mushroom” with a clean, clear attack and lots of fundamental. Dinesh also talks through a DIY suede wand idea 01:16:24.
Takeaways
Overall Notes
- Mass giveth, softness taketh away: for more fundamental, go heavier, not just softer.
- Listen like a sommelier (attack, EQ, projection).
- Look for parts with a hole already in them (because they are already “centered” and this is the hardest part of things!)
- Get a tight fit before gluing ever!
Homework
What To Do Now
Make a mallet, or two – or three. Experiment and have fun! Post your progress in the Facebook group!
Next
What Happens Next
Week 2 is show and tell!
Link to the FB group: https://www.facebook.com/groups/buildyoursingingbowlmallet